Продукция / Ebb & Flow Grow Tables
Flood-and-drain growing tables for nursery operators, commercial growers, distributors and equipment buyers. Choose an ABS flood tray with an aluminium frame and galvanized supports, then define the bench dimensions, rolling access and water-circulation package for your growing space. Custom size and supporting equipment options are reviewed against your layout and procurement requirements.
ABS tray · Configurable dimensions · Bench or matched equipment package
Compare the bench assembly and the equipment you want around it here. There is no need to open another page to understand the specification or submit an enquiry.
Core assembly
For propagation trays or potted crops where bottom watering and access are priorities.
Configuration option
For indoor or supplemental-light growing where a support frame is needed. Lamps and electrical work are not automatically included.
Equipment detail references. The final supplied parts follow the agreed drawing and packing list.
A pump supplies nutrient solution to the tray through a configured inlet. Flood depth and timing are selected for the crop, container and growing medium.
The tray drains through the specified return arrangement. Check the overflow provision and drainage route before installation.
Review solution condition, drainage and root-zone moisture before the next cycle. Reuse, filtration and sanitation depend on the agreed water circuit.
Different from a channel rack: this system floods and drains a tray holding suitable growing containers. A channel rack uses a different water-delivery arrangement; do not select one only by its supporting frame.
| Tray panel | ABS plastic |
|---|---|
| Support structure | Hot-dip galvanized material |
| Tray frame | Reinforced aluminium alloy |
| Nominal bench height | 0.7 m; adjustment and custom height reviewed per configuration |
| Listed width range | 0.61–1.78 m; confirm compatible tray and frame size |
| Length | Configured from compatible sections; final layout and joints confirmed by drawing |
| Load capacity | Confirm for the selected span, supports and total wet load |
| Irrigation and lighting | Specified separately in the equipment list |
Final specifications follow the selected configuration. Pump, reservoir, filtration, timer or controller, pipework, grow lights, pots and media are included only when listed in the quotation.
| Equipment group | Confirm in your quotation |
|---|---|
| Bench structure | Tray sections, frame, supports, bracing, levelling feet, movement arrangement and required safety components |
| Водяной контур | Fill/drain fittings, reservoir, pump, filter, pipework, overflow and return arrangement |
| Control equipment | Timer or controller, operating logic, power and plug version |
| Lighting option | Support frame, fixtures, mounting, driver and cable routing where specified |
| Growing consumables | Pots, plug trays and growing media, if requested |
A bench assembly and a complete circulation package are different supplies. The agreed drawing and itemized equipment list define what will be delivered.
Send the required dimensions, quantity and destination. Tell us whether you need a bench assembly, a lighting-support arrangement or matched circulation equipment.
Growing application reference from equipment documentation; not presented as a Wewin customer project.
Discuss seedling propagation, compatible plug trays, potted herbs or nursery crops. The choice depends on container drainage, growing medium and irrigation requirements. Direct planting into a channel and bottom watering a pot are different arrangements.
For indoor operation, confirm available light or the matched lighting requirement. For greenhouse use, check the floor, humidity, ventilation and water-management plan alongside the bench configuration.
Usable length and width, door openings, ceiling height, floor condition and proposed working aisles.
Crop, pot or plug-tray size, growing medium, estimated wet load, water source, reservoir position and drainage point.
Quantity, country, plug voltage, required accessories, packaging and assembly or support requirements.
Before ordering, agree the bench drawing, movement arrangement, fitting sizes and packing list. Installation, local electrical work and complete growing-facility design are separate scopes.
Channel-based growing configurations for leafy greens and herbs.
Compare compact and taller vertical tower configurations.
Review fixture dimensions, mounting and power requirements.
Not automatically. A bench assembly and a complete irrigation package are different supplies. Confirm the tank, pump, filters, pipes, timer and fittings item by item.
A lighting-support arrangement can be reviewed. Fixture selection, load, clearances, power supply and electrical protection must be confirmed before a matched package is offered.
It depends on crop, medium, container, root development and conditions. Confirm tray drainage and work with your growing protocol; a fixed schedule is not suitable for every crop.
Width, length and height options can be reviewed against available tray modules, support spacing, quantity and shipping requirements. Send a dimensioned layout for confirmation.
For a relevant B2B quotation, share your company, delivery country, bench quantity and required dimensions. Add a brief description of the crop, container and equipment package. Drawings or photos can be discussed during follow-up.
