{"id":824,"date":"2026-04-09T02:38:58","date_gmt":"2026-04-09T02:38:58","guid":{"rendered":"https:\/\/wewinsmartagri.com\/?post_type=product&p=824"},"modified":"2026-10-18T01:38:02","modified_gmt":"2026-10-18T01:38:02","slug":"%d8%ac%d9%87%d8%a7%d8%b2-%d8%a7%d8%b3%d8%aa%d8%b4%d8%b9%d8%a7%d8%b1-%d9%85%d8%aa%d8%b9%d8%af%d8%af-%d8%a7%d9%84%d9%85%d8%b9%d8%a7%d9%8a%d9%8a%d8%b1-%d9%84%d9%84%d8%aa%d8%b1%d8%a8%d8%a9","status":"publish","type":"product","link":"https:\/\/wewinsmartagri.com\/ar\/product\/soil-multi-parameter-sensor\/","title":{"rendered":"\u062c\u0647\u0627\u0632 \u0627\u0633\u062a\u0634\u0639\u0627\u0631 \u0627\u0644\u062a\u0631\u0628\u0629 \u0645\u062a\u0639\u062f\u062f \u0627\u0644\u0645\u0639\u0627\u064a\u064a\u0631"},"content":{"rendered":"

A multi-parameter soil sensor configuration starts with the measurements your project needs: moisture and temperature for root-zone monitoring, with EC or separate pH measurement where appropriate. The number of measurements and output channels depends on the selected probe. Do not assume that moisture, temperature, EC, pH and NPK are all included in every version.<\/p>

Choose the Soil Monitoring Configuration<\/h2>
\u0627\u0644\u0645\u062a\u0637\u0644\u0628<\/th>Configuration to review<\/th>Selection point<\/th><\/tr><\/thead>
Root-zone moisture and temperature<\/td>Soil moisture and temperature sensor<\/a><\/td>Match the measurement basis, soil type and root depth.<\/td><\/tr>
Moisture, temperature and EC at one point<\/td>3-in-1 soil moisture, temperature and EC sensor<\/a><\/td>The verified specifications below apply to this three-parameter option.<\/td><\/tr>
Soil acidity monitoring<\/td>Separate RS485 soil pH sensor<\/a><\/td>Confirm the measurement method, preparation and maintenance requirements.<\/td><\/tr>
Wireless transmission<\/td>Matched LoRa node and gateway<\/a><\/td>Verify protocol, sensor power and the destination radio configuration.<\/td><\/tr><\/tbody><\/table><\/figure>

Verified 3-in-1 Configuration<\/h2>

For the moisture, temperature and EC option, the supplied product sheet lists 9\u201324 V DC power, 150 mW average power consumption, a \u221240 to 80\u00b0C temperature range, a 0\u2013100% moisture output range and a 0\u201310,000 \u00b5S\/cm EC range. Output variants are RS485 Modbus or 4\u201320 mA, and the probe is listed as IP68. These values must not be applied to a pH or NPK model.<\/p>

\u0627\u0646\u0638\u0631 3-in-1 probe specification and output options<\/a> for the detailed table. Confirm which output variant and channels are included in the quotation.<\/p>

Integration: Check More Than the RS485 Label<\/h2>

For a Modbus installation, match the supply, pinout, baud rate, parity, device address, register map, units and scaling with the data logger. For a 4\u201320 mA installation, confirm the channel allocation and whether a separate loop is required for each measurement. The two output options are not a promise that both are fitted or usable simultaneously.<\/p>

Soil EC is a measurement in soil and is not interchangeable with nutrient-solution EC or a laboratory soil-extract result. NPK readings, where offered in a separately specified model, should not be used as the sole basis for fertilizer prescriptions without a suitable reference method.<\/p>

Placement and Installation Limits<\/h2>

Choose monitoring points that represent the soil and irrigation zones. Position probes at depths relevant to the crop’s active roots rather than applying one fixed depth to every farm. Maintain good soil contact, avoid air gaps and protect connectors from standing water and mechanical damage.<\/p>

For a date-palm orchard, coffee plantation or commercial vegetable project, begin with the local soil profile, irrigation layout and root zone. These are planning examples, not claims of completed Wewin installations. IP68 applies to the specified probe and does not automatically apply to the logger, cable joint or power enclosure.<\/p>

Sample Validation and Delivery Documents<\/h2>